Images are representations only.
Description
The Smith Meter® Guardsman™ Series Turbine Meter is a bladed, rotor-type meter which utilizes an upstream, cantilevered stator to support the tungsten carbide, bearing-mounted rotor.
It is intended for a wide range of petroleum, petrochemical, and chemical custody transfer measurement applications, such as small product pipelines ranging from Natural Gas Liquids (NGL) to light fuel oils.
Smith Meter Guardsman Series L Models are rimless-type rotor turbine meters that use an upstream stator to support the rotor.
They are intended for use at loading racks to provide the highly accurate measurement required for custody transfer of petroleum liquids.
Note: Different features and requirements are available based on where a unit is manufactured.
Throughout this document, manufacturing locations are denoted in parentheses after a feature.
You must place your order with the noted location to receive a unit with the specific feature.
Features- 1.5" to 4" Guardsman™ (G) Series
- Stainless Steel measuring chamber and internals
- Locking stator prevents wear and improves performance
- Tungsten carbide bearings system provides longlife on low lubricating fluids
- Hydrodynamic thrust balance to minimize friction and wear on thrust bearings which allows for long service life and high accuracy
- 125-250 AARH flange face finish
- 1" to 4" Guardsman™ Series Loading Rack (L) Models Turbine Meters
- Stainless-steel measuring chamber and internals
- Locking stator prevents wear and improves performance
- Stainless Steel ball bearings (LB models) and tungsten carbide journal bearings (LJ and LSJ models) provide long life on low lubricating fluids
- Integral-strate-plate flow conditioner (LSJ models)
- Horizontal or vertical installation
- Turbine Meter Diagnostics when used with AccuLoad III
Inventory
Displaying prices & availability for Ohio, United States 43201 in USD. Change location.
Models matching criteria: 38
Screw, #10-32 x ¼", UL/CSA Version Only - Item 27
Contact for Availability
Washer, ¼" Lock (BASEEFA Version Only) - Item 25
Contact for Availability
Screw, #10-32 x ¼" - Item 19
Contact for Availability
Nut, Hex, ¼"-20, UNC-2B (BASEEFA Version Only) - Item 13
Contact for Availability
Gasket, Cover - Item 10
Contact for Availability
Contact for Availability
Contact for Availability
Contact for Availability
Clip, Retaining - Item 3
Contact for Availability
Label: UL/CSA Approvals - Item 9
Contact for Availability
Cover, Conduit Box: UL/CSA Approvals - Item 7
Contact for Availability
Contact for Availability
Box, Conduit - Item 2
Contact for Availability
Coil, Pickup: -100°F to +225°F Temperature Range (Standard) - Item 4 view more
- Recommended Stock
Contact for Availability
Contact for Availability
Cone, Downstream - Item 5
Contact for Availability
Cone, Upstream - Item 6
Contact for Availability
Cover, Conduit Box: BASEEFA - Manufactured in USA - Item 7
Contact for Availability
Cover, Conduit Box: BASEEFA - Manufactured in Germany - Item 7
Contact for Availability
Screw, Set, #6-32 x ¼" - Item 8
Contact for Availability
Label: BASEEFA - Manufactured in USA - Item 9
Contact for Availability
Label: BASEEFA - Manufactured in Germany - Item 9
Contact for Availability
O-Ring - Item 14
Contact for Availability
Contact for Availability
Rotor Assembly: Current Design, 430 Stainless Steel - Item 16 view more
- Note 2: Due to a change in the design of this meter in December of 1987, it is necessary to determine whether your meter is of current or previous design. Standard serial numbers up to and including 5216, and special serial numbers up to and including 200822 are considered previous design. Numbers higher than those are current design. These numbers can be found on the nameplate and on the stator
Contact for Availability
Rotor Assembly: Previous Design, 430 Stainless Steel - Item 16 view more
- Note 2: Due to a change in the design of this meter in December of 1987, it is necessary to determine whether your meter is of current or previous design. Standard serial numbers up to and including 5216, and special serial numbers up to and including 200822 are considered previous design. Numbers higher than those are current design. These numbers can be found on the nameplate and on the stator
Contact for Availability
Contact for Availability
Spacer, Inner Race - Item 18
Contact for Availability
Stator Assembly, Locking - Item 20 view more
- Note 3: Contact Parts Marketing Specialist at the Parts Operation if problems are encountered installing stator.
Contact for Availability
Pin, Dowel, ⅛ x ⅜" - Item 21
Contact for Availability
Stud (BASEEFA Version Only) - Item 23
Contact for Availability
Washer, Inverted (BASEEFA Version Only) - Item 24
Contact for Availability
Wire, Ground, UL/CSA Version Only - Item 26
Contact for Availability
Nut, Hex #10-32, UNF-2B - Item 28 view more
- Recommended Stock
- Note 6: Replacing Item #12, Part No. 644607-403
Contact for Availability
Internal Parts Kit - 430 Stainless Steel Rotor
Contact for Availability
Housing - Item 11 view more
Note 1: Consult Parts Operation, providing the following information:
- Housing Material
- Flange Material
- Flange Class (Pressure)
- Number of Pickup Coil Bosses
- Flange Type
Contact for Availability
Nut, Flex-Loc, #10-32, UNF-2B - Item 12 view more
- Note 5: Replaced by Item #28, Part No. 640704-001
Contact for Availability
Screw, Set, #10-32 - Item 22 view more
- Note 4: Apply a small amount of Loctite (Part No. 643917-401) to set screw before installing
Contact for Availability
Specifications
Specifications
Brand
Repeatability
- ± 0.02 % over the normal flow range
End Connections
- Class 150 and 300 American Society of Mechanical Engineers (ASME) B16.5, 125-250 Arithmetic Average Roughness Height (AARH) finish raised-face (RF) flanges
- Class 150, 300, 600, 900 ASME B16.5, 125-250 AARH finish raised face (RF) flanges
- PN 16, 25 and 40 DIN 2526 Form C flange
- PN 63 and 100 DIN 2526 Form E flanges
