Images are representations only.

Meter, Turbine, 1½ Inch, Guardsman™ G, Model K2BA and GLJ-H Model K2EA Series - Spare Parts

Brand: Guidant
The Smith Meter® Guardsman™ Series Turbine Meter is a bladed, rotor-type meter which utilizes an upstream, cantilevered stator to support the tungsten carbide, bearing-mounted rotor.

It is intended for a wide range of petroleum, petrochemical, and chemical custody transfer measurement applications, such as small product pipelines ranging from Natural Gas Liquids (NGL) to light fuel oils.

Smith Meter Guardsman Series L Models are rimless-type rotor turbine meters that use an upstream stator to support the rotor.

They are intended for use at loading racks to provide the highly accurate measurement required for custody transfer of petroleum liquids.

Note: Different features and requirements are available based on where a unit is manufactured.

Throughout this document, manufacturing locations are denoted in parentheses after a feature.

You must place your order with the noted location to receive a unit with the specific feature.

Features

  • 1.5" to 4" Guardsman™ (G) Series
    • Stainless Steel measuring chamber and internals
    • Locking stator prevents wear and improves performance
    • Tungsten carbide bearings system provides longlife on low lubricating fluids
    • Hydrodynamic thrust balance to minimize friction and wear on thrust bearings which allows for long service life and high accuracy
    • 125-250 AARH flange face finish
  • 1" to 4" Guardsman™ Series Loading Rack (L) Models Turbine Meters
    • Stainless-steel measuring chamber and internals
    • Locking stator prevents wear and improves performance
    • Stainless Steel ball bearings (LB models) and tungsten carbide journal bearings (LJ and LSJ models) provide long life on low lubricating fluids
    • Integral-strate-plate flow conditioner (LSJ models)
    • Horizontal or vertical installation
    • Turbine Meter Diagnostics when used with AccuLoad III
The Smith Meter® Guardsman™ Series Turbine Meter is a bladed, rotor-type meter which utilizes an upstream, cantilevered stator to support the tungsten carbide, bearing-mounted rotor.

It is intended for a wide range of petroleum, petrochemical, and chemical custody transfer measurement applications, such as small product pipelines ranging from Natural Gas Liquids (NGL) to light fuel oils.

Smith Meter Guardsman Series L Models are rimless-type rotor turbine meters that use an upstream stator to support the rotor.

They are intended for use at loading racks to provide the highly accurate measurement required for custody transfer of petroleum liquids.

Note: Different features and requirements are available based on where a unit is manufactured.

Throughout this document, manufacturing locations are denoted in parentheses after a feature.

You must place your order with the noted location to receive a unit with the specific feature.

Features

  • 1.5" to 4" Guardsman™ (G) Series
    • Stainless Steel measuring chamber and internals
    • Locking stator prevents wear and improves performance
    • Tungsten carbide bearings system provides longlife on low lubricating fluids
    • Hydrodynamic thrust balance to minimize friction and wear on thrust bearings which allows for long service life and high accuracy
    • 125-250 AARH flange face finish
  • 1" to 4" Guardsman™ Series Loading Rack (L) Models Turbine Meters
    • Stainless-steel measuring chamber and internals
    • Locking stator prevents wear and improves performance
    • Stainless Steel ball bearings (LB models) and tungsten carbide journal bearings (LJ and LSJ models) provide long life on low lubricating fluids
    • Integral-strate-plate flow conditioner (LSJ models)
    • Horizontal or vertical installation
    • Turbine Meter Diagnostics when used with AccuLoad III
Close

Displaying prices & availability for Ohio, United States 43201 in USD. Change location.

Models matching criteria: 44
230663-101
Preamplifier: PA-6, 12 to 24 VDC - Item 1 view more
  • Recommended Stock
Contact for Availability
006621-001
Washer, Lock, ¼", ATEX version only - Item 30
Contact for Availability
006110-002
Screw, #10-32 x ¼", UL/CSA version only - Item 23
Contact for Availability
009544-401
Screw, #10-32 x ¼" - Item 22
Contact for Availability
060060-001
Nut, Hex, ¼"-20, ATEX version only - Item 16
Contact for Availability
013403-200
Gasket, Conduit Box - Item 13
Contact for Availability
540305-204
Bearing, Platform: Smooth - Item 4
Contact for Availability
543192-203
Clip, Retaining - Item 6
Contact for Availability
540296-204
Bearing, Rotor - Item 21 view more
  • Recommended Stock
Contact for Availability
543195-200
Label: UL/CSA Approvals - Item 12
Contact for Availability
645030-452
Connector, (1-5) - Item 2
Contact for Availability
645030-453
Connector, (6-10) - Item 3
Contact for Availability
544367-201
Cone, Downstream: Unidirectional or Bidirectional - Item 8
Contact for Availability
544356-202
Cone, Upstream: Unidirectional or Bidirectional - Item 9
Contact for Availability
544057-101
Cover, Conduit Box: ATEX Manufactured in U.S.A - Item 10
Contact for Availability
544057-102
Cover, Conduit Box: ATEX Manufactured in Germany - Item 10
Contact for Availability
643243-403
Screw, Set, #6-32 x ¼" - Item 11 view more
  • Thread-locking adhesive (Part No. 642917401) should be used to lock nut on stator shaft, #27, and to secure set screw #11
Contact for Availability
544056-201
Label: ATEX Manufactured in U.S.A - Item 12
Contact for Availability
544056-202
Label: ATEX Manufactured in Germany - Item 12
Contact for Availability
643747-405
Nut, Hex, #2-56 - Item 15 view more
  • Recommended Stock
  • Thread-locking adhesive (Part No. 642917401) should be used to lock nut on stator shaft, #27, and to secure set screw #11
Contact for Availability
644420-404
Ring, Retaining: 302 Stainless Steel - Item 18 view more
  • Recommended Stock
Contact for Availability
644718-404
Ring, Retaining: 316 Stainless Steel - Item 18 view more
  • Recommended Stock
Contact for Availability
544142-204
Ring, Stator Locking (Used on 900# Flange Meters only) - Item 19
Contact for Availability
544361-191
Rotor Assembly: Standard - Item 20 view more
Due to a change in the design of this meter in September of 1989, it is necessary to determine whether your meter is of current or previous design. Standard serial numbers up to and including 6252, and special serial numbers up to and including 200995 are considered previous design. Numbers higher than those are considered current design. Should either an upstream or downstream cone require replacement on a previous design meter, it will be necessary to replace both at the same time. Cones on current design meters can be replaced individually.
Contact for Availability
544324-212
Spacer, Stator (Used on 900# Flange Meters only) - Item 24
Contact for Availability
544363-101
Stator Assembly - Item 25
Contact for Availability
550773-001
Stud, ATEX Version only - Item 28
Contact for Availability
550770-001
Washer, Inverted, ATEX version only - Item 29
Contact for Availability
543522-203
Washer, Thrust - Item 31 view more
  • Recommended Stock
Contact for Availability
544058-101
Wire, Ground, UL/CSA versions only - Item 32
Contact for Availability
643164-413
Washer, Lock - Item 33
Contact for Availability
544362-101
Internal Parts Kit - Unidirectional, (STD Linearity)
Contact for Availability
544362-102
Internal Parts Kit - Bidirectional, (STD Linearity)
Contact for Availability
544362-201
Internal Parts Kit - Unidirectional, (Premium Linearity)
Contact for Availability
544362-202
Internal Parts Kit - Bidirectional, (Premium Linearity)
Contact for Availability
646655-401
Coil, Pickup: -100°F to 225°F - Item 7
Contact for Availability
Consult Factory
Coil, Pickup: -100°F to 400°F (High Temperature Version) - Item 7
Contact for Availability
Consult Factory
Coil, Pickup: Mating Connector with Leads (High Temperature Version) - Item 7
Contact for Availability
Consult Factory - See Note 2
Housing - Item 14 view more
Consult Factory, 814 898-5000, providing model and serial numbers and advising:
  1. Uni or Bidirectional
  2. Housing Material
  3. Flange Material
  4. Flange Class (Pressure)
  5. Number of Pickup Coil Bosses
  6. Type of Flange
Contact for Availability
645416-402
Screw, Set, #8-32 x 3/16" - Item 27 view more
  • Thread-locking adhesive (Part No. 642917401) should be used to lock nut on stator shaft, #27, and to secure set screw #11
Contact for Availability
Show More Models (4)
Close

Specifications

Brand

Repeatability

  • ± 0.02 % over the normal flow range

End Connections

  • Class 150 and 300 American Society of Mechanical Engineers (ASME) B16.5, 125-250 Arithmetic Average Roughness Height (AARH) finish raised-face (RF) flanges
  • Class 150, 300, 600, 900 ASME B16.5, 125-250 AARH finish raised face (RF) flanges
  • PN 16, 25 and 40 DIN 2526 Form C flange
  • PN 63 and 100 DIN 2526 Form E flanges
Close