Images are representations only.

UFM 610 P Ultrasonic Flowmeter - Portable Device

Brand: Krohne
Request Information
The UFM 610 P is a portable flowmeter designed for use on liquid flows in full pipes, which utilise “Clamp-On” Transducers.

Easy to use with rugged packaging, the UFM 610 P features a large easy to read Graphics Display with backlighting.

A simple FAST TRACK set up procedure; Simple to follow keypad; IP65 Instrument case with IP65 rated sockets; Guide rail assembly including magnets (if required) for steel pipes above 3-1/2” (89 mm) diameter.

Advantages of measuring from the outside
  • Non-contact measurement
  • No construction of the pipe cross-section
  • No additional pressure drop
  • No interruption of the process
  • Electrical conductivity, pressure, density, etc. have no effect on measurements
  • Easy to install
  • No maintenance requirement
  • Low power consumption
  • Low operating costs
Features
  • 112k memory logger 
  • RS232 output 
  • Pulse output 
  • 4-20 mA or 0-20 mA output 
  • 24 hours battery (rechargeable) 
  • Self checking facilities 
  • Battery management 
  • Continuous signal monitoring
show more
The UFM 610 P is a portable flowmeter designed for use on liquid flows in full pipes, which utilise “Clamp-On” Transducers.

Easy to use with rugged packaging, the UFM 610 P features a large easy to read Graphics Display with backlighting.

A simple FAST TRACK set up procedure; Simple to follow keypad; IP65 Instrument case with IP65 rated sockets; Guide rail assembly including magnets (if required) for steel pipes above 3-1/2” (89 mm) diameter.

Advantages of measuring from the outside
  • Non-contact measurement
  • No construction of the pipe cross-section
  • No additional pressure drop
  • No interruption of the process
  • Electrical conductivity, pressure, density, etc. have no effect on measurements
  • Easy to install
  • No maintenance requirement
  • Low power consumption
  • Low operating costs
Features
  • 112k memory logger 
  • RS232 output 
  • Pulse output 
  • 4-20 mA or 0-20 mA output 
  • 24 hours battery (rechargeable) 
  • Self checking facilities 
  • Battery management 
  • Continuous signal monitoring
Close

Specifications

Brand

Ambient Temperature Range

  • -25° to 60° C (-13° to 140° F)

Applications

  • Acids
  • Alkaline Solutions
  • Boiler Feedwater in Power Stations
  • Checking Other Flowmeters
  • Demineralized Water for Cooling Purposes
  • Oil
  • Pretreated Wastewater in Sewage Plants

Approvals & Certifications

  • CE to EN 50081-1 & EN 50082-1
  • TÜV

Cable Length

  • Sensor Cable: 10 feet (3 metres)

Consumption

  • Power: 9 VA

Display

  • Backlit

Electrical Connectors

  • Coaxial Cable RG 174 with LEMO Connectors
  • Plug Connection (5-Pin, 9-Pin)

Enclosure, Body Material

  • Carrying Case: Hard Plastic
  • Sensor Housing: PEEK (Polyetheretherketone)

Environmental Protection

  • IP65
  • IP66
  • NEMA 4
  • NEMA 4X

Interface Connection

  • RS-232

Load

  • 1 Kiloohm for Pulse Output

Materials of Construction

  • Mounting Device: Anodized Aluminum
  • Pipeline: Metal
  • Pipeline: Plastic

Measuring Error

  • ± 0.066 Foot/second (± 0.02 m/sec) - for V < 3.3 feet/sec (1 m/sec)
  • ± 2 % of Measured Value - for V ≥ 3.3 feet/sec (1 m/sec)

Media

  • Liquids

Output

  • 0 to 16 mA
  • 0-20 mA
  • 1 Pulse/second
  • 100 Pulses/second
  • 4-20 mA

Output Format

  • Current Output
  • Pulse Output

Power Supply

  • 15 V from Signal Converter
  • 90-257 Vac, 50/60 Hz

Pulse Range

  • Pulse Width: 100 milliseconds
  • Pulse Width: 5 milliseconds

Repeatability

  • ± 0.5 % of Measured Value

Sensor, Probe Connection

  • Lemo Connector

Sensor, Probe Style

  • Ultrasonic

Temperature Range

  • -20° to 200° C (-4° to 392° F)

Time Constant

  • 3 to 100 seconds
Close

Typical Applications

  • Demineralized water for cooling purposes
  • Boiler feedwater in power stations
  • Pretreated wastewater in sewage plants
  • Checking other flowmeters
  • Oil
  • Acids
  • Alkaline solutions
Close