Images are representations only.
Description
Features
- Pneumatic Actuators
- Rack & Pinion design
- Position Indicator standard
- Hard Anodized Aluminum Extruded Body
- Epoxy Coated Die Cast Aluminum end caps
- Travel Adjustments standard
- Double Acting & Spring Return models
- 90 Degree rotation
- Optional available accessories:
- NAMUR Mount NEMA 4, 3-Way & 4-Way Solenoid Valves
- 115 VAC & 24 VDC Stocked as Standard; Other Voltage and NEMA 7 available as option
- NEMA 4, 4X Limit Switches with Dome Style Indicator Stocked as Standard; NEMA 7 and 3-Way Indication available as option
- Electric Actuators:
- Made in the USA
- NEMA 4 Enclosure Standard; NEMA 4X, 7, 4 & 7, and 4X & 7 Enclosures available
- 115 VAC Stocked as Standard; 12 VDC through 460 VAC/3PH available
- Manual Overrides Standard on 400”/# & above models
- Dome Style Visual Indicators standard
- Universal Mounting
- Open/Close Switches standard; Extra Auxiliary Switches available
- Polyester Powder Coating standard; Epoxy Coating & Electroless Nickel Coating available
- Spring Return Units along with Internal and External Battery Backup System available
- Available Accessories & Options:
- Brakes
- Positioners for Modulation
- Heater & Thermostat
- Multi-position
- Multi-turn Actuation available
Configure
Specifications
Specifications
Brand
Pressure Ranges
- 40 psig to 100 psig
- 3 bar to 8 bar
Temperature Ranges
- Standard (NBR O-rings): -20° C (-4° F) to +80° C (+176° F)
- Lower Temperature (Silicone O-rings): -40° C (-40° F) to +80° C (+176° F)
- High Temperature (Viton O-rings): -15° C (+5° F) to +150° C (+300° F) ゚
- Note: Special grease is required for low and high temperature service condition
Operating Media
- Filtered dry or lubricated air for non-corrosive gas, water or light hydraulic oil. The maximumparticle size must not exceed 30 microns
Stroke Adjustment
- 0°and 90° with standard adjustment ± 5°
Lubrication
- All moving parts are factory lubricated for entire life cycle of actuator
Construction
- Twin piston rack and pinion actuator design, suitable for indoor and outdoor installation
Connections
- Bottom drilling complies with ISO 5211/DIN 3337 to match valve. Interface for solenoid valve, shaft top end and top drilling for assembling accessories are in accordance with VDI/VDE-3845, NAMUR standard
Inspection
- Every actuator is hydraulically tested, certified and guaranteed for a minimum of 500,000 cycles
