Images are representations only.

V/KSM Vacuum Relief Valve

Brand: PROTEGO
The Protego valve V/KSM is a state-of-the-art vacuum relief valve with excellent flow performance made of high grade synthetic material. 

It is used as a safety device to relieve vacuum in tanks, containers, and process engineering equipment; it prevents the inbreathing of air until reaching the set vacuum. 

The valve is a perfect solution for corrosive, polymerizing or sticky media. 

The device will start to open as soon as the set vacuum is reached and is fully open within 10% vacuum increase. 

Continuous investments into research and development have allowed Protego to develop a low pressure valve which has the same opening characteristic as a high pressure safety relief valve. 

This "full lift type" technology allows the valve to be set just 10% below the maximum allowable working vacuum (MAWV) of the tank and still safely vent the required mass flow.
Features
  • "Full lift type" technology valve utilizes only 10% overpressure to reach full lift
  • Extreme tightness and hence least possible product losses and reduced environmental pollution
  • The set pressure is close to the opening pressure which results in best possible pressure management of the system
  • The valve pallet is guided within the housing to protect against harsh weather conditions
  • Corrosion resistant valve
  • Perfect solution for corrosive, polymerizing and sticky media
  • Weight reduction in comparison to steel/stainless steel
  • Smooth surface
  • Automatic condensate drain
  • Different plastics can be combined
  • Maintenance friendly design
The Protego valve V/KSM is a state-of-the-art vacuum relief valve with excellent flow performance made of high grade synthetic material. 

It is used as a safety device to relieve vacuum in tanks, containers, and process engineering equipment; it prevents the inbreathing of air until reaching the set vacuum. 

The valve is a perfect solution for corrosive, polymerizing or sticky media. 

The device will start to open as soon as the set vacuum is reached and is fully open within 10% vacuum increase. 

Continuous investments into research and development have allowed Protego to develop a low pressure valve which has the same opening characteristic as a high pressure safety relief valve. 

This "full lift type" technology allows the valve to be set just 10% below the maximum allowable working vacuum (MAWV) of the tank and still safely vent the required mass flow.
Features
  • "Full lift type" technology valve utilizes only 10% overpressure to reach full lift
  • Extreme tightness and hence least possible product losses and reduced environmental pollution
  • The set pressure is close to the opening pressure which results in best possible pressure management of the system
  • The valve pallet is guided within the housing to protect against harsh weather conditions
  • Corrosion resistant valve
  • Perfect solution for corrosive, polymerizing and sticky media
  • Weight reduction in comparison to steel/stainless steel
  • Smooth surface
  • Automatic condensate drain
  • Different plastics can be combined
  • Maintenance friendly design
Close

Specifications

Brand

Approvals & Certifications

  • ISO 6358. ISO 16016
  • TÜV (Technischer Uberwachungsverein)

Enclosure, Body Material

  • Polyethylene
  • Polypropylene
  • PVDF

Flange Size - 2” (DN 50)

  • 2" (DN 50) - 150# ASME B16.5

Flange Size - 3” (DN 80)

  • 3" (DN 80) - 150# ASME B16.5

Flange Size - 4” (DN 100)

  • 4" (DN 100) - 150# ASME B16.5

Flange Size - 6” (DN 150)

  • 6" (DN 150) - 150# ASME B16.5

Flange Size - 8” (DN 200)

  • 8" (DN 200) - 150# ASME B16.5

Flange Type

  • Flat Face (FF)
  • Smooth Finish

Materials of Construction

  • Valve Pallet, Weight: Hastelloy
  • Valve Pallet, Weight: Polyethylene
  • Valve Pallet, Weight: Polypropylene
  • Valve Pallet, Weight: PVDF

Pressure Range

  • psi: -1.45 to -0.058 (kPa: -10 to -0.4, Mbar: -100 to -4) for DN 80 (3")
  • psi: -1.45 to -0.065 (kPa: -10 to -0.45, Mbar: -100 to -4.5) for DN 100 (4") to DN 200 (8")
  • psi: -1.45 to -0.08 (kPa: -10 to -0.6, Mbar: -100 to -6) for DN 50 (2")

Seat / Seal Material

  • Seal: FPM
  • Seal: PTFE
  • Valve Seat: Polyethylene
  • Valve Seat: Polypropylene
  • Valve Seat: PVDF

Spindle Material

  • Spindle Guide: Hastelloy
  • Spindle Guide: Polyethylene
  • Spindle Guide: Polypropylene
  • Spindle Guide: PVDF
Close